Installation Instructions

Pace1PRMT - 3 -
Structured
Cable to
Midspan/
Endspan
Green LED
indicates
PoE Present
from Midspan/
Endspan
Green LED
indicates
PoE being
transmitted
to Pace1PTM
CAT5 or higher
from Pace1PTM
Single UTP
from
Pace1PTM
Structured
Cable from
Camera/Device
Green LED
indicates
PoE transmitted
to Camera/Device
Green LED
indicates
PoE received
from Pace1PRM
CAT5 or higher
from Pace
receiver
Single UTP
from
Pace1PRM
*Note: Caution, once PoE connection is established between Pace1PRM and Pace1PTM, discon-
nection from Pace1PTM will not disable the PoE output voltage on the Pace1PRM, although the
Pace1PTM can be reconnected, caution should be taken not to connect the CAT5e or single UTP
wiring from Pace1PRM to any non-PoE device.
PoE compliant
100m max.
100m max.
Mounting Hole
PoE Camera
Pace1PTM
Pace1PRM
I.T.E. 43KC
RJ45
Link
Z1409
UTP
Link
RJ45 LEDs Yellow - Activity
Green - Speed
Green LED Power and PoE
PoE
Out
Output
PoE
LED
Input
PoE
LED
www.altronix.com
IP-UTP Transceiver
Passes PoE/PoE+
Pace1PTM - Transceiver
RJ45
Link
Output
PoE
LED
Input
PoE
LED
UTP
Link
PoE
Input
I.T.E. 43KC
Z1409
RJ45 LEDs Yellow - Activity
Green - Speed
Green LED Power and PoE
www.altronix.com
IP-UTP Receiver
Passes PoE/PoE+
Pace1PRM - Receiver
Structured Cable
or Single UTP
Legend:
PoE+ over CAT5e up to 500m max.
or
Single UTP up to 152.4m max.
Powered Switch or NetWay MidSpan
Single PoE Camera Connection Utilizing Pace1PRM and Pace1PTM:
Fig. 2 Fig. 2a
Pace1PRM
Pace1PTM
To access pins which are located behind
the UTP Link you must remove cover.
Note: Make sure jumpers are lined up
with pins pairs [F5] and [F6] as shown
in top and side views noted in
Figs. 1a & 1b.
Fig. 1
Fig. 1a Fig. 1b
Side View
Top View
UTP
Link
P5
Jumper
P6
P5 P6