Data Sheet

The Pace1PTM is a long range Ethernet transceiver designed for use with
Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM receivers. They transmit
data at 100mbps full duplex and power via a single twisted pair (UTP) (when
paired with Pace1PRM) or Cat5e or higher cable in a PoE(+) compliant format.
The Pace1PTM will not deliver power to non compliant devices, thus avoid-
ing damage to improperly connected non-PoE cameras/devices. The receiver
passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver
which in turn passes this power to an enabled IP camera/device. These plug
and play units facilitate cost effective solutions for IP devices that need to be
installed at distances greater than 100m. They also provide a simple way to
replace legacy analog products with new IP devices over single twisted pair
(UTP) (when paired with Pace1PRM) or structured cable.
Pace1PTM - IP and PoE+ over Extended
Distance UTP or CAT5e
Rev. DSPace1PTM_10282015
Specifications
Agency Listings:
• UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
• CE approved.
• C-Tick compliant.
Input:
• PoE (15W) IEEE 802.3af compliant or PoE+ (30W)
IEEE 802.3at compliant from Pace1PRM, Pace4PRM,
Pace8PRM, or Pace16PRM.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5e or a single twisted pair UTP.
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
PoE compliant to IEEE 802.3af (15W) and PoE+
compliant to IEEE 802.3at (30W) delivered to
camera by Pace1PTM.
• Throughput is rated to pass 100mbps of data.
UTP (single twisted pair) from Receiver to Pace1PTM:
• Distance: up to 152m @ 100mbps.
CAT5e or Higher from Receiver to Pace1PTM:
• Distance: up to 500m @ 100mbps.
LED Indicators:
• Green - PoE ON (by respective RJ45 jack).
• Yellow and Green LED IP Link status,
10/100Base-T/active.
Environmental:
• Operating Temperature:
For 15W: --- 40ºC to 75ºC (--- 40ºF to 167ºF).
For 25W: --- 40ºC to 70ºC (--- 40ºF to 158ºF).
For 30W: --- 40ºC to 60ºC (--- 40ºF to 140ºF).
• Storage Temperature:
--- 40ºC to 75ºC (-- 40ºF to 167ºF).
• Relative humidity: 20 to 85%, non-condensing.
• Operating altitude: -- 304.8 to 2000m
(-- 1000 to 6,561.679 ft.).
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog CCTV
CAT5 or UTP installations.
• Extend Network link distance in an industrial
environment.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras. With proper head end equipment.
Mechanical:
• Dimensions (W x L x H approx.):
3.5” x 3.5” x 1” (88.89mm x 88.89mm x 25.4mm).
• Product weight (approx.): 0.25 lbs. (0.11 kg).
• Shipping weight (approx.): 0.42 lbs. (0.19 kg).
Overview
Agency Approvals
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
European Conformity
C-Tick Compliant
Z1409
Pace1PTM