Installation Instructions

ManualsBrandsAltronix ManualsPOWERCCTV Power Supply, 8 Fused Outputs, 24/28VAC @ 28A, 115VAC, 2U

Rev. 120809

More than just power.

R248 Series

Rack Mount CCTV Power Supplies

Installation Guide

Models Include:

R248100

- 24VAC @ 4A (100VA) or

28VAC @ 3.5A (100VA).

- Eight (8) Fuse Protected Outputs.

R248300

- 24VAC @ 14A (300VA) or

28VAC @ 12.5A (300VA).

- Eight (8) Fuse Protected Outputs.

R248600

- 24VAC @ 28A (600VA) or

28VAC @ 25A (600VA).

- Eight (8) Fuse Protected Outputs.

R248100CB

- 24VAC @ 4A (100VA) or

28VAC @ 3.5A (100VA).

- Eight (8) PTC Protected Outputs.

R248300CB

- 24VAC @ 14A (300VA) or

28VAC @ 12.5A (300VA).

- Eight (8) PTC Protected Outputs.

R248600CB

- 24VAC @ 28A (600VA) or

28VAC @ 25A (600VA).

- Eight (8) PTC Protected Outputs.

Summary of content (4 pages)

PAGE 1
R248 Series Rack Mount CCTV Power Supplies Installation Guide Models Include: R248100 R248100CB R248300 R248300CB R248600 R248600CB - 24VAC @ 4A (100VA) or 28VAC @ 3.5A (100VA). - Eight (8) Fuse Protected Outputs. - 24VAC @ 14A (300VA) or 28VAC @ 12.5A (300VA). - Eight (8) Fuse Protected Outputs. - 24VAC @ 28A (600VA) or 28VAC @ 25A (600VA). - Eight (8) Fuse Protected Outputs. Rev. 120809 - 24VAC @ 4A (100VA) or 28VAC @ 3.5A (100VA). - Eight (8) PTC Protected Outputs.
PAGE 2
Overview: Altronix R248 Series Rack Mount CCTV Power Supplies provide 24VAC or 28VAC distributed via eight (8) fuse or PTC protected outputs for powering CCTV cameras, heaters and other video accessories. Eight (8) Output R248 Rack Mount Configuration Reference Chart: Altronix Model Number R248100 R248100CB R248300 R28300CB R248600 R248600CB Output Voltage (VAC) 24VAC 28VAC 24VAC 28VAC 24VAC 28VAC 24VAC 28VAC 24VAC 28VAC 24VAC 28VAC Total utput Number O Current of (Power) Outputs 4A 8 3.5A 4A 8 3.
PAGE 3
10. Green power LEDs on faceplate will illuminate when power is present. When an output is in a trouble condition (blown fuse or tripped PTC), the corresponding LED will not be illuminated (Fig. 1, pg. 3). a. Blown fuse - Set power disconnect circuit breaker on the back of the unit to the OFF position (Fig. 1c, pg. 3). Remove front faceplate to access fuses. Replace with fuses rated @ 3.5A/250VA (Altronix model # Fuse1). b.
PAGE 4
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. This installation should be made by qualified service personnel and should conform to the National Electrical Code and all local codes. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock.