Installation Instructions Owner's manual

RB1224 - Relay Module
Specifications:
• 12VDC or 24VDC selectable operation.
• Open SW1 for 24VDC operation.
Close SW1 for 12VDC operation.
• Current draws: 75mA.
• 5 amp/220VAC or 28VDC DPDT contacts.
• Snap track mountable (order part # ST1).
Board dimensions (approximate): 2.75"L x 2"W x 1"H
NEG --
CNCNO
POS +CNCNO
OPEN - 24VDC
R2
SW1
NEG --
CNCNO
POS +CNCNO
OPEN - 24VDC
R2
SW1
TO BELL OUTPUT
TERMINALS OF CONTROL PANEL
+
--
Dry Contacts
NEG --
CNCNO
POS +CNCNO
OPEN - 24VDC
R2
SW1
TO BELL OUTPUT
TERMINALS OF CONTROL PANEL
+
--
TO PHONE LINE
PHONE LINE
POWER IN
Polarity Reversal
NEG --
CNCNO
POS +CNCNO
OPEN - 24VDC
R2
SW1
CONSTANT
POWER
SOURCE
N.O. TRIP SWITCH
N.C.
RESET
SWITCH
+
--
USED TO
MAKE/
BREAK
LOAD
Latching Dry Contacts
NEG --
CNCNO
POS +CNCNO
OPEN - 24VDC
R2
SW1
TO BELL OUTPUT
TERMINALS OF CONTROL PANEL
TO ALARM
TRANSMITTER
IN COMING
TELEPHONE
LINE
HOUSE
PHONE
+
--
Line Seizure
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: [phone]
website: www.altronix.com, e-mail: [e-mail], Lifetime Warranty, Made in U.S.A.
IIRB1224 - Rev. 121205 B11I
MEMBER
SW1 Clip Switch