Data Sheet
ReServ1WP
Outdoor Video Surveillance UPS
Rev. DSReServ1WP_06172016
ReServ1WP Outdoor Video Surveillance UPS is designed to simultaneously
provide power for 24VAC and 12VDC cameras during normal or power outage
conditions. True sine wave regulated AC outputs and regulated DC outputs.
Overview
Specifications
®
®
Agency Approvals
European Conformity
UL/CUL Listed for Information Technology
Equipment (UL 60950-1).
Input:
• 115VAC 60Hz, 3.5A.
Output:
• 16 individually PTC protected outputs
configured as follows:
• Twelve (12) outputs @ 24VAC.
• Four (4) outputs @ 12VDC.
• Total supply current:
24VAC @ 4A (0.33A per device, 1A max.).
and 12VDC @ 2A (0.5A per device, 1A max.).
(Amb. Temp. -33º - 30º C).
24VAC @ 3.5A (0.29A per device, 1A max.).
and 12VDC @ 2A (0.5A per device, 1A max.).
(Amb. Temp. -33º - 42º C).
• PTC protected power-limited outputs are rated @ 1A.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switchover to stand-by battery
when AC fails.
Stand-by Batteries
4A (100VA) load
at 24VAC and 2A load
at 12VDC max.
Two (2) 12VDC/7AH 45 minutes
Two (2) 12VDC/12AH 90 minutes
Supervision:
• AC fail supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
Electrical:
• 45 BTU/Hr.
• System AC input VA requirement: 402.5VA.
Features:
• AC/DC power LED indicators.
• Sixteen (16) power output LED indicators.
• Low voltage input and Shutdown LED indicators.
• True sine wave regulated AC outputs and
regulated DC outputs.
• Audible alarm provides notification of
UPS trouble conditions.
• Unit maintains camera synchronization.
• Ease of installation saves time and eliminates
costly labor.
Mechanical:
• NEMA4 / IP66 Rated Enclosure.
• Integral flanges simplify wall or pole mounting.
• Enclosure Dimensions (H x W x D approx.):
17.375” x 12” x 6.5” (441.3mm x 304.8mm x 165.1mm)
• Enclosure accommodates up to
two (2) 12VDC/12AH batteries.
• Product weight (approx.): 21.5 lbs. (9.75 kg).
• Shipping weight (approx.): 23.0 lbs. (10.43 kg).
ReServ1WP