K.M. Thomas

142
888.258.7669
®
Power Supply/Chargers
DPS1
• 1.2 amp @ 6VDC or 12VDC or .75 amp @ 24VDC supply current.
• PTC battery protection.
• Plug-in transformer required.*
Board dimensions: 3"L x 2.5"W x 1.5"H
DPS3
• 2.5 amp @ 6VDC, 12VDC or 24VDC.
• Transformer required.*
Board dimensions: 3.5"L x 3"W x 2"H
DPS5
• 4 amp @ 6VDC, 12VDC or 24VDC.
• Transformer required.*
Board dimensions:
3.5"L x 2.75"W x 1.75"H
Power Distribution Modules
DP4
• Converts a single AC or DC input into four (4)
individually fuse protected outputs.
• Handles up to 48VAC/VDC.
• Fuses are rated @ 3.5 amp/250V (Up to 5 amp fuses may be used).
• Power ON/OFF switch.
• Includes snap track and DIN Rail mounting clips.
Board dimensions: 3"L x 2.5"W x 1.5"H
DP4CB
• DP4 with PTC protected outputs.
• PTCs are rated @ 2.5 amp.
* Refer to the Altronix Power Supply Transformer Selection Tables
on page 13 for the proper transformer.
DPS3
din rail products
Order DIN Rail separately
Features:
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid or gel type batteries.
• AC input and DC power output LED indicators.
• Snap track, DIN Rail mounting clips and
battery leads.
* Refer to page 153 for DIN Rail Mounting Accessories.
automation