K.M. Thomas

Features:
12 to 24 volt AC or DC operation (setting not required)..
Power supply input options:
a) One (1) common power input (board and lock power).
b) Two (2) isolated power inputs (one (1) for board power
and one (1) for lock/hardware power).
Four (4) Access Control System trigger inputs.
Input options:
a) Four (4) normally open [NO] inputs.
b) Four (4) open collector inputs.
c) Any combination of the above.
Four (4) independently controlled fuse protected outputs.
Output options (ACM4 and ACM4E):
a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
b) Four (4) form “C” 5 amp rated relay outputs
c) Any combination of the above.
Output options (ACM4CB and ACM4CBE):
a) Four (4) Fail-Safe and/or Fail-Secure power outputs.
Four (4) auxiliary power
outputs (unswitched).
Blade type fuses (ACM4/ACM4E).
ACM4 main fuse is rated @ 10 amp.
Red LEDs indicate outputs are
triggered (relays energized).
Fire Alarm disconnect (latching
or non-latching) is individually selectable
for any or all of the four (4) outputs.
Fire Alarm disconnect input options:
a) Normally open [NO] or normally closed [NC] dry contact input.
b) Polarity reversal input from FACP signaling circuit.
Alarm output relay indicates that FACP input is triggered.
Green LED indicates FACP disconnect is triggered.
* Units will operate from 12 volts to 24 volts AC or DC with a total
load of 10 amp max.
Output voltage is equal to the input voltage.
ACM4
UL Listed Sub-Assembly for Access Control.
Four (4) fuse protected outputs.
Board dimensions: 5.125"L x 3.625"W x 1.25"H
ACM4E
UL Listed in the U.S. and Canada for Access Control.
Four (4) fuse protected outputs.
Enclosure dimensions: 8.5"H x 7.5"W x 3.5"D
ACM4CB
UL Listed Sub-Assembly for Access Control.
Four (4) PTC protected outputs.
Board dimensions: 5.125"L x 3.625"W x 1.25"H
ACM4CBE
UL Listed in the U.S. and Canada for Access Control.
Four (4) PTC protected outputs.
Enclosure dimensions: 8.5"H x 7.5"W x 3.5"D
access power controllers
Four (4) Output
ACM4CB
32
888.258.7669
access
®