K.M. Thomas

altronix.com
83
surveillance
®
ethernet over coax + power solutions
eBridge1PCRT
• UL Listed in the U.S. and Canada for CCTV,
CE Approved, C-Tick Approved.
• IEEE 802.3af (15.4W) compliant.
• Includes one (1) eBridge1PCR and one (1) eBridge1PCT.
eBridge1PCR
• IEEE 802.3af (15.4W) compliant.
• Single port receiver.
• Input: 24VAC or 24VDC.
eBridge1PCT
• Single port transceiver to be used with eBridge1PCR
for IEEE 802.3af (15.4W) compliant devices.
eBridge1PCRTX
• IEEE 802.3af (15.4W) and IEEE 802.3at (30W) compliant.
• Includes one (1) eBridge1PCRX and one (1) eBridge1PCTX.
eBridge1PCRX
• IEEE 802.3af (15.4W) and IEEE 802.3at (30W) compliant.
• Single port receiver.
• Input: 24VDC - 56VDC.
eBridge1PCTX
• Single port transceiver to be used with eBridge1PCRX
for IEEE 802.3at (30W) compliant devices.
Single Port Ethernet over Coax/PoE Adapters
Features:
• Transmits IP video/data and power over
existing coax cable up to 1500 ft. without repeaters.
• Ethernet distance up to 100m (328 ft.), coax distance up to 1500 ft.
• Eliminates labor and costs of deploying new cable.
• Auto detection and protection of legacy non-PoE cameras/devices.
• Supports IP cameras and access control devices.
• Incorporates *sloc™ (Security Link over Coax) technology.
• Throughput is rated to pass 25mbps of data at distances of up to 1500 ft.
• Ethernet Speed: 10/100BaseT, half/full duplex, auto negotiation.
•
Connectivity: RJ45, auto-crossover.
• LEDs indicate Power, Coax link and IP link status.
* sloc is a registered trademark of Intersil Corporation.