K.M. Thomas

84
888.258.7669
surveillance
®
ethernet over coax + power solutions
eBridge4PCRX
• UL Listed in the U.S. and Canada for CCTV,
CE Approved, C-Tick Approved.
• Four (4) port receiver.
• IEEE 802.3af (15.4W) and IEEE 802.3at (30W) compliant.
eBridge16PCRX
• UL Listed in the U.S. and Canada for CCTV,
CE Approved, C-Tick Approved.
• Sixteen (16) port receiver.
• IEEE 802.3af (15.4W) and IEEE 802.3at (30W) compliant.
• Compact 1U EIA 19” rack mount chassis .
Features:
• Transmits IP video/data and power over
existing coax cable up to 1500 ft. without repeaters.
• Ethernet port facilitates programming and
status monitoring via LAN or laptop.
• Ethernet distance up to 100m (328 ft.), coax distance up to 1500 ft.
• Eliminates labor and costs of deploying new cable.
• Auto detection and protection of legacy non-PoE cameras/devices.
• Supports IP cameras and access control devices.
• Incorporates *sloc™ (Security Link over Coax) technology.
• Throughput is rated to pass 25mbps of data at distances of up to 1500 ft.
• Ethernet Speed: 10/100BaseT, half/full duplex, auto negotiation.
•
Connectivity: RJ45, auto-crossover.
• LEDs indicate Power, Coax link and IP link status.
• Input: 48VDC - 56VDC (use 54V to 56V power supply
to achieve full power per .3at standard).
* sloc is a registered trademark of Intersil Corporation.
Ethernet over Coax/PoE Receivers (managed)
eBridge16CR