Specifications

Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
3.23
Power Supplies
PowerDsine
Power
Power over Ethernet;Midspan/17436
Index1.Netw orking Systems //Video Products//Video Security Systems
POWERDSINE PR28890V2-212735.eps
Mircrosemi’s PowerDsine 9501G is a single-port, PoE
solution for remote powering of
current and emerging high-power applications. Generating a maximum of 60 W, the
PD-9501G enables remote power for a new range of new applications, including PTZ
cameras, video phones and thin clients. It complies with IEEE 802.3at PoE standard
parameters, while doubling the available power. It can power both existing 10/
100BASE-T network devices and such emerging wireless gigabit devices as WiMAX
and remote distance wireless IEEE 802.11n access points.
FEATURES
• Up to 60 W of power using all four pairs
• IEEE 802.3af- and 802.3at-compliant with higher power
• Backwards compatible with all Cisco and legacy devices
• Safe: Low-power devices receive only the power they need; two-pair PDs receive
power on two pairs
• Safe and reliable PoE
• Automatic detection and protection of non-standard Ethernet terminals
• Supports 10/100/1000BASE-T applications
• Compact design fits easily in WLAN access-point installations
Power over Ethernet;Splitter/17437
Index1.Netw orking Systems //Video Products//Video Sec
urity Systems
POWERDSINE PR28891V2-212740.eps
Mircrosemi’s PowerDsine PD-AS-951 by Microsemi high-power active splitters enable
data terminals that were not originally designed to accept Power over Ethernet, to be
powered by PoE midspans. The PD-AS-951 high-power splitter (user-selectable 12 V
or 24 V) can power devices such as WiMAX CPEs, small WiMAX base-stations,
802.11n access points, thin clients, PTZ IP cameras, video phones and more.
FEATURES
• 2 x RJ45, shielded, EIA 568A and 568B
• Data rate 10/100/1000 Mbps
• Electrical pin assignment and polarity
• One-year warranty
Power over Ethernet;Midspan/18254
Index1.N etworking Systems //Video Produc ts//Video Sec
urity Systems
POWERDSINE PR40796V2-294042.eps
Microsemi's PowerDsine 9500G family is currently available in 6- and 12-port
models. Generating a maximum of 60 W, the PD-9500G devices enable remote power
for a new range of applications including PTZ cameras, video phones and thin clients.
It complies with IEEE 802.3at PoE standards, while doubling the available power. It
can power both existing 10/100BASE-T network devices and such emerging gigabit
devices as WiMAX and remote distance wireless IEEE 802.11n access points.
FEATURES
• Up to 60 W of power using all four pairs
• IEEE 802.3at-compliant with higher power
• Backward compatible with all Cisco and legacy devices
• Safe: Low-power devices receive only the power they need; two pair PDs receive
power over only two pairs
• Safe and reliable PoE
• Automatic detection and protection of nonstandard Et
hernet terminals
• Supports 10/100/1000BASE-T applications
• Remote SNMPv3 or Web-based management
• Supports both IPv4 and IPv6 addressing
PowerDsine 9501G Power over Ethernet Midspan
Anixter No. Vendor No. Description
406585 PD-9501G/AC Single-port high-power midspan, 60 W,
10/100/1000 BASE-T, AC input
PowerDsine 951 60 W, Four-pair Splitter
Anixter No. Vendor No. Description
414987 PD-AS-951/12-24 Four pairs high-power splitter - for use
with PD-9500G series (user selectable DC
output 12 V/24 V)
419318 PD-AS-951/12-24/C Four pairs high-power splitter with open
DC wires - for use with PD-9500G series
(user selectable DC output 12 V/24 V)
PowerDsine 9500G Power over Ethernet Midspan Family
Anixter No. Vendor No. Description
433254 PD-9506G/ACDC/M 6-port, high-power midspan, 60 W, 10/
100/1000BASE-T, DC and AC input
433255 PD-9512G/ACDC/M 12-port, high-power Midspan, 60 W, 10/
100/1000BASE-T, DC and AC input
S03Dat2.fm Page 23 Tuesday, December 11, 2012 10:00 PM