Installation Instructions

- 4 - SMP1024Xseries
LOW BAT
NC C NO NC C NO
OFF ON
5A 250V
AC FAIL
--- BAT + --- DC +
15
AC DC
Power
Distribution
Module
Door
CAUTION: De-energize unit prior to servicing. For continued protection against risk of
electric shock and fire hazard replace fuse with the same type and rating 5A, 250V.
Earth
Ground
Wire Strap
(from Enclosure
to Door)
115 power
mains
Class 1
Divider
Optional Rechargeable
Stand-by Battery
Optional Rechargeable
Stand-by Battery
Keep power-limited wiring separate from non power-limited. Use minimum 0.25" spacing.
CAUTION: Optional rechargeable stand-by batteries must match
the power supply output voltage setting.
INPUT
LED
1P, 2P, 3P, 4P = FUSED OUTPUTS
1N, 2N, 3N, 4N = COMMON OUTPUTS
F1
F1
F2 F3 F4
COMMON POWER OUTPUTS
1P
1N
2P
2N
3P
3N
4P
4N
DC Output to devices
From Power Supply
Board
(Factory Installed)
Used
on PTC
Models
N
COMMON POWER OUTPUTS
P
FUSED POWER OUTPUTS
1 2 3 4 5 6 7 8
1
D1
INPUT
R1
LED
DC Output to devices
From Power Supply
Board
(Factory Installed)
Used
on PTC
Models
Fig. 1
Fig. 2
Fig. 3
Fig. 1a
Power Distribution Module(s):
LOW BAT
NC C NO NC C NO
OFF ON
5A 250V
AC FAIL
--- BAT + --- DC +
15
AC DC
Power
Distribution
Module
Door
CAUTION: De-energize unit prior to servicing. For continued protection against risk of
electric shock and fire hazard replace fuse with the same type and rating 5A, 250V.
Green
Lead
Battery connection
Wire Strap
(from Enclosure
to Door)
115 power
mains
Class 1
Divider
12VDC Rechargeable Battery
(optional)
12VDC Rechargeable Battery
(optional)
PD4/PD4CB
PD8/PD8CB