Installation Guide

ManualsBrandsAltronix ManualsSupply ChargersAltronix SMP5CTX220 Series Power Supply Chargers

Rev. 120116

More than just power.

Installing Company: _______________ Service Rep. Name: __________________________________

Address: _____________________________________________ Phone #: __________________

SMP5CTX220 Series

Power Supply/Chargers

Models Include:

SMP5CTX220

- 12VDC or 24VDC @ 4A.

SMP5PMCTX220

- 12VDC or 24VDC @ 4A.

- AC fail and Low Battery supervision (form “C” contacts).

Installation Guide

Summary of content (8 pages)

PAGE 1
SMP5CTX220 Series Power Supply/Chargers Models Include: SMP5CTX220 - 12VDC or 24VDC @ 4A. SMP5PMCTX220 - 12VDC or 24VDC @ 4A. - AC fail and Low Battery supervision (form “C” contacts). Installation Guide Rev. 120116 More than just power.TM Installing Company: _______________ Service Rep.
PAGE 2
Overview: Altronix SMP5CTX220 and SMP5PMCTX220 power supply/chargers convert 115VAC or 230VAC (working range 198VAC - 256VAC), 50Hz/60Hz input into a regulated 12VDC or 24VDC output with 4A of continuous load current (see specifications). Specifications: Agency Listing: Supervision (SMP5PMCTX220 only): • CE European Conformity. • AC fail supervision (form “C” contacts). • Low battery supervision (form “C” contacts). Input: • 115VAC, 50/60Hz, 0.95A or 230VAC (working range 198VAC - 256VAC), 50/60Hz, 0.
PAGE 3
8. Connect devices to be powered to the terminals marked [– DC + ] carefully observing correct polarity. Note: Power switch is used to disconnect the L (HOT) terminal from the rest of the board. When servicing the unit, AC mains should be removed. 9. When using stand-by batteries, they must be lead acid or gel type. Connect battery to the terminals marked [– BAT +] (battery leads included). 12VDC operation: Use one (1) 12VDC battery. 24VDC operation: Use two (2) 12VDC batteries connected in series.
PAGE 4
LED Diagnostics: Red (DC) ON ON OFF OFF Green (AC) ON OFF ON OFF Power Supply Status Normal operating condition. Loss of AC. Stand-by battery supplying power. No DC output. Loss of AC. Discharged or no stand-by battery. No DC output. Terminal Identification: Terminal Legend L, G, N – DC + Function/Description Connect 115VAC/230VAC to these terminals: L to Hot, N to Neutral. 12VDC / 24VDC @ 4A continuous output. *AC FAIL NC, C, NO Used to notify loss of AC power, e.g.
PAGE 5
Notes: SMP5CTX220 Series Installation Guide -5-
PAGE 6
Notes: -6- SMP5CTX220 Series Installation Guide
PAGE 7
Notes: SMP5CTX220 Series Installation Guide -7-
PAGE 8
Enclosure Dimensions (BC300): 13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.6mm) Enclosure accommodates up to two (2) 12VDC/7AH batteries. 1.40” (35.6mm) 4.85” (123.2mm) 4.85” (123.2mm) 1.40” (35.6mm) 1.20” (30.5mm) 0.75” (19.1mm) 3.25” (82.6mm) 1.20” (30.5mm) 0.75” (19.1mm) 12.5” (317.5mm) 11.0” (279.4mm) 1.20” (30.5mm) 0.9375” (23.8mm) 1.40” (35.6mm) 1.40” (35.6mm) 5.10” (129.5mm) 5.10” (129.5mm) 13.0” (330.2mm) 6.5625” (166.7mm) 5.10” (129.5mm) 0.9375” (23.8mm) 3.25” (82.6mm) 3.25” (82.