Installation Instructions

Specification Chart:
Model # Input (Primary) Output (Secondary)
T16100 115VAC, 50/60Hz, 0.5A 16VAC/100VA (6.25A)
Installation Instructions:
1. Mount transformer in desired location/enclosure (refer to Transformer Drawing and Dimensions below).
2. Connect AC power 115VAC, 50/60Hz to primary leads (black and white) from terminal numbers 2 and 4
(refer to Wiring Configuration below).
3. Measure output voltage across the secondary leads (yellow and blue) from terminal numbers 6 and 10 (refer to Wiring
Configuration below) before connecting devices. This helps avoiding potential damage.
4. Connect 16VAC device to be powered to the secondary leads (yellow and blue) from terminal numbers 6 and 10
(refer to Wiring Configuration below).
WARNING: This installation should be made by qualified service personnel and should conform to the National Electrical Code
and all local codes.
Wiring Configuration:
Transformer Drawing and Dimensions:
16VAC (Secondary) Output
10 9 8 7 6
115VAC (Primary) Input
5 4 3 2 1
3.5”
89mm
3.1”
79mm
2.6”
66mm
Secondary
Leads
1.4”
35mm
2.5”
64mm
4.25”
108mm
Primary
Leads
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: info@altronix.com.
IIT16100 - Rev. 051612 I07U
MEMBER
T16100
Open Frame Transformer

Summary of content (1 pages)