Manualshelf

Spec Sheet

ManualsBrandsAltronix ManualsAccess Control Power products4-Door Access and Power Integration Kit - Trove1M1R with eFlow6NBV, ACM4CB, PDS8CB, VR6
1234
- Output Power:
- Four (4) 24VDC fused lock power outputs rated at 6A total max.
- Fire Alarm Disconnect is individually selectable by output.
- Eight (8) individully selectable 12VDC or 24VDC fused power
outputs rated at 6A total max. for readers, REXs, controllers, etc.
- Accommodates the following Mercury controllers:
LP1502, MR52, MR16IN, MR16OUT, LP2500, MUX8,
MR621e, LP1501, MR50.
- Power status LED on front panel.
- Simplified board layout and wire management.
- Convenient knockout configuration:
- Six (6) 1.25” diameter knockouts located on the back
of enclosure.
- 6’ IEC320 3-wire power cord.
- 2U drawer on extendable rails.
- Black powder coated steel enclosure.
- Included Z Bracket facilitates ease of wiring.
- Includes cam lock, tamper switch and mounting hardware.
- CE European Conformity.
- Lifetime Warranty* / Made in the U.S.A.
Key Features
*Altronix Power Supply/Charger and Sub-Assemblies only
T1RM3F4V
T1RM3F4V
Rack Access and Power Integration Solution for Mercury
Altronix T1RM3F4V kit consists of Trove1R enclosure and TM1R Altronix &
Mercury backplane with 12VDC or 24VDC (factory set at 24VDC) @ 6A power
supply/charger, 12VDC voltage regulator, eight (8) output fused dual output
power distribution module and four (4) fuse protected output access control
module. This kit also accommodates various combinations of Mercury* boards
for up to four (4) doors in a single enclosure. Trove simplifies board layout and
wire management, reduces installation time and labor costs.
Rev. 08042021
*Also compatible with these authentic Mercury partners:
AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson
Controls, Kastle, Keri Systems, Lenel/S2, LockState, Maxxess, Midpoint Security, NLSS,
Open Options, Panasonic Video Insight, Quintron, RS2, Schneider Electric, Vanderbilt
Accessories (order separately)
WM5, WM25, WM100 - Magnetic Cable Tie Mounts
Altronix WM5, WM25, and WM100 are packs of 5, 25 or 100 magnetic cable tie mounts respectively.
They accommodate standard zip ties or velcro straps. These are ideal for wire management in our Trove series.
RE2 - Rack Mount Battery Enclosure
Altronix RE2 accommodates up to four (4) 12VDC/7AH batteries.
WM5
RE2

Summary of content (4 pages)