Installation Guide

- 2 - Trove2BH2
Installation Instructions for Altronix Sub-Assemblies to TBH2:
1. Insert screw (provided) into hole configuration (A) from the backside of backplane (Fig. 2a, pg. 2).
Screw standoff onto screws, repeat for additional three (3) board mounting holes.
2. Mount boards to standoffs utilizing 5/16” pan head screws (provided) (Fig. 2a, pg. 2).
Altronix Sub-Assemblies Position Chart:
Altronix Board Pem Mounting
Altronix PD16W(CB) Sub-Assembly A
Standoff
Altronix
Sub-Assembly
Backplane
Pan Head
Screw
Pan Head Screw
(through backplane)
A
A
Fig. 2a
Fig. 2