Installation Guide

Trove / Lenel - 8 -
Installation Instructions for Lenel Access Controllers to TM2:
1. Fasten snap on standoffs onto metal pems configuration (A) (B) of backplane depending on the access controller (Fig. 5, pg. 8).
2. Position access controller module over corresponding standoffs and depress onto snap on standoffs (Fig. 5a, pg. 8).
3. Mount backplane to enclosure with hardware.
Access Controller Position Chart for the Following Models:
Lenel
Pem
Mounting
Current Draw
LNL-2210
A
12VDC 900mA max.
LNL-1300e 12VDC 1100mA max.
LNL-1300 B 12-24VDC 150mA max. (12VDC @ 110mA nom., 24VDC @ 60mA nom.)
Fig. 5
BB
A A
A A
A
Snap on or
Metal
Standoff
Sub-Assembly
Backplane
Pem
Fig. 5a