Installation Guide

- 9 - Trove / Lenel
Installation Instructions for Lenel Access Controllers to TMV2 (Door Backplane):
1. Fasten snap on standoffs onto metal pems configuration (A) (B) of backplane depending on the access controller (Fig. 6, pg. 9).
2. Position access controller module over corresponding standoffs and depress onto snap on standoffs (Fig. 6a, pg. 9).
3. Mount backplane to enclosure with hardware.
Access Controller Position Chart for the Following Models:
Lenel
Pem
Mounting
Current Draw
LNL-3300
A
12-24VDC 300mA max.
LNL-8000 12VDC 250mA max.
LNL-2220
B
12-24VDC 500mA max.
LNL-4420 12-24VDC 500mA max.
LNL-1100 12-24VDC 350mA max. (12VDC @ 300mA nom., 24VDC @ 220mA nom.)
LNL-1200 12-24VDC 1100mA max. (12VDC @ 850mA nom., 24VDC @ 450mA nom.)
LNL-1320 12-24VDC 550mA max. (12VDC @ 450mA nom., 24VDC @ 270mA nom.)
Fig. 6
BA BA
BA
BA
BA
BA
Snap on or
Metal
Standoff
Sub-Assembly
Backplane
Pem
Fig. 6a