Spec Sheet

WayPoint562
Outdoor 56VDC Power Suppy/Charger
Rev. WayPoint562-09132017
Description
Altronix WayPoint562 provides 120W for NetWay Spectrum switches with 1Gb SFP
ports. It converts 115VAC, 60Hz or 230VAC, 50Hz input into a 56VDC at 2.2A of
continuous supply current (see specifications). It also features a built-in charger
for sealed lead acid or gel type batteries. Lightweight molded fiberglass reinforced
polyester enclosure is NEMA 4/4X, IP66-11 Rated for outdoor use. It features lock-
able stainless steel latches and integral flanges to simplify wall or pole mounting.
Input
Voltage 115VAC, 60 Hz, 2.5A or 230VAC, 50Hz, 1.3A.
Outputs
Voltage 56VDC/120W output.
Current 2.2A continuous supply current.
Other Short circuit and thermal overload protection.
Filtered and regulated.
Back-up Battery (not included)
Type Sealed lead acid or gel type.
Failover Upon AC loss, instantaneous.
Indicators (LED)
Input Input voltage is present.
DC Output Powered.
Agency Listings
CE European Conformity
Physical and Environmental
Dimensions (H x W x D)
13.31” x 11.31” x 5.59” (338.1mm x 287.3mm x 142mm).
Product Weight 8.5 lbs. (3.9 kg).
Shipping Weight 9.7 lbs. (4.4 kg).
Temperature
Operating
60W: -40ºC to 75ºC (-40ºF to 167ºF);
75W: -40ºC to 70ºC (-40ºF to 158ºF);
100W: -40ºC to 55ºC (-40ºF to 131ºF),
120W: -40ºC to 45ºC (-40ºF to 113ºF)..
Storage -40ºC to 70ºC (-40ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr. (approx.): 72 BTU/Hr.
Specifications
Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA
phone: [phone] | fax: [phone] | email: [e-mail] | www.altronix.com
Accessories
PMK1 Pole Mount Kit (order separately)
PMK1 pole mount kit is designed to simplify installation of outdoor units.
It accommodates 2”- 8”(diameter) poles.
Kit includes:
- Two (2) powder coated steel mount brackets.
- Four (4) stainless steel bolts.
- Four (4) stainless steel lock washers.
- Two (2) wormgear quick release straps.
PMK1
WayPoint562