Systems Inc. Cypress Visual Sensor User Manual Document No.: 50-04-00002 v1.
Content Document Revision Table 3 Device Information 4 Regulatory 5 Before You Start 7 Hardware Specifications 8 Visit Our Wesbite 9 Compatible Devices 10 iOS App Instructions 11 We take your privacy seriously Privacy is built into Cypress at every level. No personally identifiable formation, photos, or videos are ever stored on our device. Document No.: 50-04-00002 v1.
Document Revision Table Revision Date Author Description 1 7-Jun-2019 A. Heydaryan First Release A. Heydaryan Added regulatory information 1.1 19-Jun-2019 Document No.: 50-04-00002 v1.
Device Information Cypress model number: Model No.: 30-03-00004 Made In Canada FCC ID: 2ATH6-CYPVS1 IC: 25095-CYPVS1 Contains FCC ID: Z64-WL18DBMOD Contains IC: 451I-WL18DBMOD Document No.: 50-04-00002 v1.
Regulatory FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Regulatory RF Exposure Statement The Cypress Visual Sensor has been tested and meets applicable limits for radio frequency (RF) exposure. The Cypress Visual Sensor should be installed and operated with at least 20cm between the radiator and your body. Innovation, Science and Economic Development Canada (ISED) Compliance Notice This device complies with Canadian RSS-247. To prevent radio interference to the licensed service, this device is intended to be operated indoors.
Before You Start Cypress needs wifi with active internet connection and a power outlet to work. Use only the power adapter and power cord supplied by AltumView. Use of any unapproved power adapter and/or power cord may damage your Cypress Visual Sensor and is strictly forbidden and will void your warranty. Document No.: 50-04-00002 v1.
Hardware specification CPU 2 ARM Cortex A73 @1.6GHz 2 ARM Cortex A53 @1.3GHz 1 ARM Cortex A53 @1.0GHz GPU Dual-core ARM Malu G71 @900MHz Vision Processor Dual-core NNIE @840 MHz Quad-core DSP @700MHz Ports microSD Card Wifi WiFi 802.11a/b/g/n Bluetooth Bluetooth Low Energy 5.0 Night Mode 9 Infrared emitters allow for function at night AC Power 100-240VAC, 50/60Hz DC Power 12V ⎓ 1.5A, 18W Document No.: 50-04-00002 v1.
Visit Our Website Please head over to www.altumview.com for the most updated version of this document. www.altumview.com Document No.: 50-04-00002 v1.
Compatible Devices Cypress app can work on any of the following iOS device running iOS 12 or later. iPhone X iPhone 8 iPhone 8 Plus iPhone 7 iPhone 7 Plus iPhone 6s iPhone 6s Plus iPhone 6 iPhone 6 Plus iPhone SE iPhone 5s Document No.: 50-04-00002 v1.1 12.9-inch iPad Pro 2nd gen 12.9-inch iPad Pro 1st gen 10.5-inch iPad Pro 9.7-inch iPad Pro 9.
iOS App Instructions Signing up Use the “Sign Up” button to register an account with AltumView. You need a valid email address to complete this procedure. Document No.: 50-04-00002 v1.
iOS App Instructions Adding a device Tap on the area and the zone that you wish to add Cypress to, then tap on “Add Device”. Follow on-screen instructions to connect the Cypress Visual Sensor to wifi and you’re done. Document No.: 50-04-00002 v1.
iOS App Instructions Areas and zones From the first tab you can access all of your areas and you can add a new one with the “Add Area” button. Areas contain zones inside them. You can think of areas like different floors of a building and zones like different rooms on each floor. Please note that devices can only be added to zones and not areas. Document No.: 50-04-00002 v1.
iOS App Instructions People The second tab called “People” is where you can add people to the app. Adding people here allows Cypress to recognize them by their pictures and let you know when an incident happens. Behaviour patterns can only be shown for people that are in this list. Document No.: 50-04-00002 v1.
iOS App Instructions Alerts In the “Alerts” tab you can see all of the incidents that have happened. Recent incidents that have not been resolved have a red dot next to them. Inside each incident you have the option to replay the stick figure recreation of the incident. You also have the option to start a two-way audio call to the device directly. Document No.: 50-04-00002 v1.
iOS App Instructions Dashboard The dashboard tab gives you insight into the daily activities and behaviour of the “People” that you have added in the second tab. You get information like which areas zones they like to spend their times at most, and pictures of the zones which highlight where incidents happen most often. Document No.: 50-04-00002 v1.
