Dryer User Manual ADC70W EN 2960312937/201221.
Please read this user manual first! Dear Customer, Thank you for prefering a Altus product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference. If you transfer the product to someone else, give its manual as well.
1 Important instructions for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.
Important instructions for safety and environment • Before putting laundry in a steam program, stains on it should be removed. • You may only put laundry that is not dirty or stained but permeated with unpleasant odour in steam (odour removal) program. • Do not use any dry cleaning sets or additional materials in a steam program or in any program. 1.1.1 Electrical safety Electrical safety instructions should be followed while electrical connection is made during the installation.
Important instructions for safety and environment • Power cable plug must be easily accessible after installation. Damaged mains cable should be changed notifying an Authorised Service Agent. If the dryer is faulty, it must not be operated unless it is repaired by an authorized service agent! There is the risk of electric shock! 1.1.
Important instructions for safety and environment Below specified laundry or items must not be dried in the dryer due to the fire hazard: • Garments or pillows bolstered with rubber foam (latex foam), shower hats, water resistant textiles, materials with rubber reinforcement and rubber foam pads. • Clothing cleaned with industrial chemicals. Items such as lighter, match, coins, metal parts, needle etc. may damage the drum set or may lead to functional problems.
Important instructions for safety and environment Underwear that contains metal reinforcements should not be dried in the dryer. Dryer may be damaged if metal reinforcements come loose and break off during drying. Use softeners and similar products in accordance with the instructions of their manufacturers. Always clean the lint filter before or after each loading. Never operate the dryer without the lint filter installed. • Never attempt to repair the dryer by yourself.
Important instructions for safety and environment • Exhaust air must not be discharged into a flue which is used for exhausting fumes from appliances burning gas or other fuels. • The final step of the drying cycle (cool-down cycle) occurs without applying heat to ensure that the items are left at a temperature that will not damage them. 1.2 Stacking on top of a washing machine • A fixing device should be used between the two machines when installing the dryer above a washing machine.
Important instructions for safety and environment 1.3 Intended use • Dryer has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use. • Use the dryer only for drying laundry that are marked accordingly. • The manufacturer waives any responsibility arisen from incorrect usage or transportation. 1.4 Child safety • Packaging materials are dangerous for the children. Keep packaging materials away from children.
Important instructions for safety and environment 1.5 Compliance with the WEEE regulation and disposing of the waste product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life.
Important instructions for safety and environment 1.8 Technical Specifications EN Height (Min. / Max.) Width Depth Capacity (max.) Net weight (± 4 kg) Voltage Rated power input Model code 84,6 cm / 86,6 cm* 59,7 cm 56,8 cm 7 kg** 34 kg See type label*** * Min. height: Height with adjustable feet are closed. Max. height: Height with adjustable feet are opened maximum. ** Dry laundry weight before washing. *** Type label is located behind the loading door.
2 Your Dryer 2.1 Overview 10 1 2 3 9 8 1. Top panel 2. Control panel 3. Loading door 4. Kick plate opening button 5. Ventilation grids 6. Adjustable legs 7. Kick plate & *water tank (*located behind the kick plate ) 8. Type label 9. Lint filter 10. Power cord 4 5 7 6 2.2 Package Contents 1 6 2 7 3 4 5 8 1. Water drain hose * 2. Filter drawer spare sponge* 3. User Manual 4. Drying basket* 5. Drying basket user manual* 6. Water Filling Container* 7. Pure Water* 8.
3 Installation Before the calling the nearest Authorized Service for the installation of the dryer, ensure that electrical installation and water drain is appropriate referring to the user’s manual. If they are not suitable, contact a qualified electrician and technician to make necessary arrangements. C A Preparation of the dryer's location as well as the electrical and waste water installations is under customer's responsibility. B Do not place the dryer on the power cable.
Installation 3.4 Adjusting the feet • Turn the feet to left or right until the dryer stands level and firmly. 3.5 Transportation of the dryer Drain all water that has remained in the dryer. If direct water drain connection is made, then remove the hose connections. Important: C C C C 14 / EN During full capacity usage, it is advised to use the machine with direct drain connection, since the machine may pause with flashing water tank warning symbol.
4 Preparation 4.1 Laundry suitable for drying in the dryer Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme. Do not dry with dryer At high temperature At medium temperature At low temperature 4.
Preparation Following weights are given as examples. Laundry Cotton quilt covers (double) Cotton quilt covers (single) Bed sheets (double) Bed sheets (single) Large tablecloths Small tablecloths Tea towels Bath towels Hand towels Blouses Cotton shirts Shirts Cotton dresses Dresses Jeans Handkerchiefs (10 pieces) T-Shirts Approximate weights (g)* 1500 1000 500 350 700 250 100 700 350 150 300 250 500 350 700 100 125 *Dry laundry weight before washing.
5 Operating the product 5.1 Control Panel 1 1. 2. 3. 4. 4 3 On/Off/Program selection button Start/Pause button End Time button Audio warning level button 2 5.2 Symbols Tank full Filter Filter drawer / Child-proof lock cleaning Heat exchanger Mute On/Off cleaning Low Timer Delay Temperature 5.3 Preparation of drying machine • • • • Plug the drying machine. Open the loading door. Place the laundry to the drying machine without jamming them. Push and close the loading door.
Operating the product 5.4 Programme selection and consumption tablee Programmes Programme Description Capacity (kg) Spin speed in washing machine (rpm) Drying Time (minutes) EN Cottons Iron Dry You may dry your cotton laundry to be ironed in this programme to have them slightly damp for ease ofironing. (Shirt, T-shirt, tablecloth, etc.) 7 1000 110 You may dry all your cotton laundry in this programme.(T-shirt, pants, pyjamas, baby Cottons Cupboard Dry clothes, underwear,linen, etc.
Operating the product Delicates It dries the shirts in a more sensitive manner, and causes less creasing and easier ironing. Xpress Super Short Dries shirts more delicately and thus causes less wrinkles for easy ironing. 2 600 40 0,5 1200 14 Energy consumption values Programmes Cotton Cupboard Dry Plus Capacity (kg) Energy consumption value kWh per year Energy rating star 7 310 2 * : Energy Label standard program (AS/NZS 2442) “All the filters must be cleaned prior to test series.
Operating the product 5.5 Auxiliary functions Cancelling the end time function Drying machine makes an audible warning when the program is completed. If you don’t want it to make an audible warning, press the “Buzzer” button. When you press the Buzzer button, a light will illuminate and no audible warning will be made when the program ends. 5.6 Warning indicators Audible warning C You can select this function before or after the program starts.
Operating the product Press the End Time and Buzzer buttons simultaneously for 3 buttons to activate the child lock. The child lock has to be deactivated to be able to start a new program after the current program is finished or to be able to interfere with the program. To deactivate the child lock, keep the same buttons pressed for 3 seconds. C C When the child lock is activated, the child lock warning indicator on the screen turns on.
Operating the product 5.10 Cancelling the program If you want to cancel the program and terminate the drying operation for any reason after the drying machine starts running, turn the On/Off/Cancel knob, the program will be cancelled. A The inside of the drying machine shall be extremely hot when you cancel the program during machine operation, so run the refresh program to allow it to cool down. 5.
6 Maintenance and cleaning Service life of the product extends and frequently faced problems decrease if cleaned at regular intervals. 6.1 Lint Filter / Loading Door Inner Surface Lint and fiber released from the laundry to the air during the drying cycle are collected in the Lint Filter. A C Always clean the lint filter and the inner surfaces of the loading door after each drying process. You can clean the lint filter housing with a vacuum cleaner.
Maintenance and cleaning C A Do not use metal tools when cleaning metal surfaces of the sensors. CAUTION: Never use solvents, cleaning agents or similar substances for cleaning due to the risk of fire and explosion! 6.3 Draining the water tank Dampness of the laundry is removed and condensed during drying process and the water that arise accumulates in the water tank. Drain the water tank after each drying cycle.
Maintenance and cleaning 3. Pull out the condenser. 4. Clean the condenser by applying pressurized water with a shower armature and wait until the water drains. 5. Place the condenser in its housing. Fasten the 2 locks and make sure that they are seated securely. 6. Close the kick plate cover.
7 Troubleshooting Drying operation takes too long. • Fibre filter pores might be clogged. >>> Wash the filter with warm water. • Filter drawer might be clogged. >>> Clean the sponge and filter cloth (if any) in the filter drawer. (for the products with a heat pump) • The condenser might be blocked. >>> Wash the condenser.(for the products with a condenser ) • The ventilation grills in front of the machine may be closed. >>> Remove any objects in front of the ventilation grills that blocks air.
Troubleshooting Clothes have shrunk, hardened or spoiled. • A program not suitable with the laundry type might have been used. >>> Check the maintenance labels on the clothes and select a program suitable for the clothes. The lighting inside the drying machine does not turn on. (For models with a lamp) • Drying machine might not be turned on with the On/Off button or program might not be selected for machines without an On/Off button. >>> Make sure that the drying machine is turned on.
