User manual

Hotkey Beeper Control
The Beeper (see Activate Beeper, p. 43) can be Hotkey toggled On and Off. To
toggle the Beeper, key in the following Hotkey combination:
1. Invoke HKM (see p. 51).
2. Press [B]
After you press B, the Beeper toggles On or Off. The Command Line displays
Beeper On or Beeper Off for one second; then the message disappears and you
automatically exit HKM.
Hotkey Summary Table
[Num Lock] + [
*
]
or
[Num Lock] + [ - ]
[Port ID] [Enter] Switches access to the computer that
corresponds to that Port ID.
[T] [n] [Enter] Sets the Auto Scan interval to n seconds
- where n is a number from 1 - 255.
[A] Invokes Auto Scan Mode.
When Auto Scan Mode is in effect, [P] or
Left Click pauses Auto Scanning.
When Auto Scanning is paused, pressing
Any Key or another Left Click resumes
Auto Scanning.
[←]
Invokes Skip Mode andSkips from the
current port to the first accessible port
previous to it.
[→]
Invokes Skip Mode andSkips from the
current port to the next accessible port.
[↑]
Invokes Skip Mode andSkips from the
current port to the last accessible port of
the previous Station.
[↓]
Invokes Skip Mode andSkips from the
current port to the first accessible port of
the next Station.
[B] Toggles the Beeper On or Off.
2004-08-04
56