Specifications

16
installation and use of the KH0116.
Console
• A VGA, SVGA or Multisync monitor capable of the highest resolution that
you plan to use on any computer in the installation.
• A PS/2 style mouse
• A PS/2 style keyboard
Computers
To use and access the KH0116 successfully, your computer requires the
following:
• A VGA, SVGA or Multisync card.
• A 6-pin mini-DIN (PS/2 style) mouse port.*
• Either a 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on pin 4
and Ground on pin 3, or a 5-pin DIN (AT Style) keyboard port with +5V
DC on pin 5 and ground on pin 4.*
* See the note under Cables in the next section.
Cables
Substandard cables may damage the connected devices or degrade overall
performance. For optimum signal integrity and to simplify the layout,
ALTUSEN strongly recommends using the high quality Altusen Custom
Cable sets described below:
KC1700, KC1701
KC5102P, KC5203P
NOTE:
1. The KH0116 does not support serial mice. You cannot use Serial-to-PS/2 adapters
with the cables.
2. If your computer uses an AT style keyboard socket you must purchase a PS/2-to-
AT keyboard adpater in order to plug the cable into the computer’s keyboard port.
noitcnuFrebmuNtraPSC
ysiaD(hctiwSMVKothctiwSMVK
)gniniahC
)teef2(m6.0-0071CK
)teef6(m8.1-1071CK
retupmoCothctiwSMVK)teef6(m8.1-P2025CK
)teef01(m0.3-P3025CK