Specifications

Front Panel

The front panel of the KH0116 includes six features as shown in the figure below.

Each number in the figure corresponds to a numbered step that follows.

1. Port LEDs

Each Port LED provides status information about corresponding CPU Ports. Each

Port consists of a left and right LED pair: On Line LED (left port) and Selected

Port LED (right port). The following describes the LED light indicators:

• An GREEN On Line LED indicates the corresponding attached computer

port is up and running.

• A ORANGE Selected LED indicates the corresponding attached computer has

the KVM focus. Under normal conditions, the LED is steady. When accessing

its port under Auto Scan Mode (see page 29) the LED flashes.

• Each time the KH0116 powers on, the Switch performs a self-test. The On line

and Selected LEDs blink once in succession during the self-test.

2. Reset Switch

Press the recessed Reset switch with a thin object (the end of a paper clip or

ballpoint pen) to perform a system reset.

3. Remote Console Area

• If you choose to use a remote console, its cable plugs into this RJ-45

connector. When a Local and Remote Console are present, both can access the

switch (not simultaneously).

• Push the Select button to toggle between the remote and the local console.

234 56