Specifications

23
To set up a daisy chained installation, do the following:
1.Turn off power to all devices with which you plan to connect.
2. Use a Daisy Chain cable set (described in the Cables section, page 16),
to connect the Chain Out port of the parent KH0116 unit to the Chain In
port of the child KH0116 unit (First Station Out to Second Station In,
Second Station Out to Third Station In, etc.).
NOTE: Do not use the Chain In port of the First Station. The Chain In port is
the highest-level parent in the chain.
3. Use custom cable sets (described in the Cables section, page 16), to
connect any available CPU port on the KH0116 installation to the
Keyboard, Video and Mouse ports of the computers you are installing.
4. To power up the installation, do the following:
a. Plug in the power cable for the first KVM station (KVM switch). Wait for
the unit to ascertain and display its Station ID on the Station ID LED. (The
Station ID for the First Stage unit is 01, the ID for the Second Stage unit is
02, the ID for the Third Stage unit is 03, and so on.)
b. Plug in the power cables for each KVM station on the installation in
order of Second Station, Third Station and so on. In each case, wait for the
Station ID to be ascertained and displayed on the current KVM station
before plugging in the next one.