Specifications

25
Powering Off and Restarting
You may need to power off a KH0116 unit occasionally. Do the following
before powering the KH0116 unit on again:
1.Turn off power to all connected computers.
NOTE: Unplug the power cord of any computer with the Keyboard Power On
function; otherwise, the KVM station continues to receive power from the computers.
2.Wait 10 seconds, and then plug-in the KH0116.
3.Power on the computers only after the KH0116 station is running.
NOTE: If you shut down more then one KVM station, power up the highest station
first, and work your way down to the lowest station.
Port ID Numbering
Each CPU port on a KH0116 installation has a unique assigned Port ID.
The Port ID includes two parts: a Station Number and a Port Number as
described below:
• The Station Number - A two-digit number indicating the KH0116’s
position in the daisy chain sequence. The Station number corresponds
to the number displayed on the front panel Station ID LED.
• The Port Number - A two-digit number indicating the corresponding
connection port on the KH0116 station.
• The Station Number precedes the Port Number.
• Station and Port numbers 1 - 9 include a preceding zero and display as 01
- 09. For example, a computer attached to Port 6 of Station 12 has a Port
ID of 12-06.
Port Selection
You can select ports using the following two methods: entering Hotkey
combinations from the keyboard or using the On-Screen Display (OSD).
NOTE: For more information on Hotkey Port Selection, see Chapter 3 on page 27.
For more information on OSD Operation, see page 33.