Specifications

42
noitpOniaMnoitpircseD
STROPWEIVKCIUQTES +WEIVQroWEIVQehtrehtietcelesuoyfI•
3Fees(EDOMPIKS/NACSrofsnoitpoNOREWOP
kciuQsadetcelesstropesohtylno,)73egapnoTES
.dennacsotuaeraweiV
STROPELBISSECCATES otsseccaresuenimretednacrotartsinimdanA
sasisabtrop-yb-tropanonoitallatsniehtnosretupmoc
:wolebdebircsed
tluafed)sseccalluf(F•
)ylnoweiv(V•
s'resunoyalpsidtonseodtrop:)sseccaon(knalB•
.TSILuneMniaM
sserpnehtdnatroptegratehttceles,sseccaresutesoT
,V,F(noitceleshcaehguorhtelcycot]rabecapS[
sserpdnasthgirsseccaresullaroftaepeR.)knalb
.dehsinifnehw}retnE{
SDINOITATSTESER ysiadehtninoitisopnoitatsMVKaegnahcuoyfI
wenehthtiwdnopserrocregnolonsgnittesDSO,niahc
noitatsMVKnacserotnoitcnufsihtesU.noitisop
.DSOehtetadpudnasnoitisop
tsumuoY.etadpusrebmunnoitatsMVKylnO:ETON
elbisseccAteSsahcus(sgnittesrotartsinimdallaoder
snoitatsMVKllarof)stroPweiVkciuQteSdnastroP
.detceffatonerasemantroP.egnahcehtybdetceffa
EDARGPUERAWMRIF edargpuotedomedargpUerawmriFetavitcatsumuoY
.)5retpahCees(erawmrifs'6110HKeht
In the case that administrator forget the correct combination of the user name and
password, do the following to restore the default user name and password:
1.Turn off the power of KH0116;
2.Open the cover of KH0116, and short the jumper marked “Restore Default
Password”;
3.Turn the power of KH0116 while this jumper is shorted, you can see the
LEDs start blinking. Wait until LEDs stop blinking and then turn off the
power;
4.Resume the jumper to open position and put the cover on;
5.Turn the power back on for KH0116. The assigned user names and
passwords should all be cleared. You will be able to start the OSD with the
default user name and password.