Specifications

Chapter

Control KH0116 Remotely

The Altusen High Density KVM Switch can be control remotely in two ways:

1.Using the Remote console port and the Remote Console Station

(Altusen Part No. KA9250) to control KH0116 from up to 500 feet (150

meters) away;

2.Using KVM on the Net (Altusen Part No. KN9000) to control KH0116

over LAN/WAN, or Internet.

Control KH0116 from up to 500’ (150 meters) away

The Remote Console port on KH0116 allows you to use Category 5E cabling and

the Remote Console Station KA9250 to control the KVM from up to 500’ (150m)

away. To set up the remote console, do the following:

Before you start, please make sure KA9250 is not powered on,

KH0116 is either powered off or on Local Console (the Local

Console LED of Remote Console on KH0116 is on).

1. Plug one end of the Category 5E cabling into the RJ-45 port in the

Remote Console Area of KH0116, and plug the other end of Category 5E

cabling into the RJ-45 port on the Remote Console Station KA9250 (refer

to the KA9250 drawing for detail).

NOTE: In order to assure the optimum video quality, make sure you use Category 5E

(also called Enhanced Category 5) or Category 6 cabling with solid conductor.

Stranded patch cables are only used for short distance patching, not for distance as far

as 500’. For details regarding cabling standards, contact your cable manufacturers.

2.Plug the keyboard, monitor and mouse into the corresponding ports on

the Remote Console Station (refer to the next drawing for detail).

3.Plug the power adapter (supplied with KA9250) into the power jack of

KA9250 and the AC outlet.