User manual
Table Of Contents
- KH1508Ai / KH1516Ai User Manual
- Introduction
- Hardware Setup
- Basic Operation
- OSD Operation
- OSD Overview
- OSD Navigation
- OSD Main Screen Headings
- OSD Functions
- Hotkey Port Control
- Invoking Hotkey Mode
- Selecting the Active Port
- Auto Scan Mode Switching
- Skip Mode Switching
- Computer Keyboard / Mouse Reset
- Setting the Hotkey Beeper ON/OFF
- Setting the Hotkey key combination
- Setting the OSD Hotkey combination
- Setting the Port Operating System
- Restore the Default Values
- Hotkey Summary Table
- Logging In
- The User Interface
- Port Access
- User Management
- Device Management
- Log
- Maintenance
- Download
- Port Operation
- The Log Server
- Appendix
Chapter 11. Maintenance
137
Adapter Firmware Upgrade
The Adapter Firmware page is used to upgrade the firmware of the KVM
Adapter Cables.
To perform the upgrades, do the following:
1. Log in to the KH1508
Ai / KH1516Ai; click the Maintenance tab; and
select the Adapter Firmware menu item: to bring up a list of the adapter
firmware versions that are stored in the main firmware. If you upgraded
the main firmware, it may contain newer versions of the adapter firmware
than the versions currently on the adapters.
2. Compare the adapter firmware versions stored in the main firmware with
the versions listed in the Current F/W Version column of the Main Panel.
If the versions stored in the firmware are newer than the ones on the
adapters, you will probably want to perform the adapter upgrade.
3. In the Name column of the Main Panel, check the ports whose Adapters
you want to upgrade.