User manual
Table Of Contents
- KH1508Ai / KH1516Ai User Manual
- Introduction
- Hardware Setup
- Basic Operation
- OSD Operation
- OSD Overview
- OSD Navigation
- OSD Main Screen Headings
- OSD Functions
- Hotkey Port Control
- Invoking Hotkey Mode
- Selecting the Active Port
- Auto Scan Mode Switching
- Skip Mode Switching
- Computer Keyboard / Mouse Reset
- Setting the Hotkey Beeper ON/OFF
- Setting the Hotkey key combination
- Setting the OSD Hotkey combination
- Setting the Port Operating System
- Restore the Default Values
- Hotkey Summary Table
- Logging In
- The User Interface
- Port Access
- User Management
- Device Management
- Log
- Maintenance
- Download
- Port Operation
- The Log Server
- Appendix
KH1508Ai / KH1516Ai User Manual
10
No. Component Description
1 Power Socket The AC power cord plugs in here.
2 Power Switch This rocker switch powers the unit on and off.
3 LAN Port The cable that connects the KH1508
Ai / KH1516Ai to the
Internet plugs in here. The LEDs indicate data transmission
speed: ORANGE for 10 Mbps; GREEN for 100 Mbps.
4 PON Port This connector is provided for a Power over the Net™ (PON)
unit to plug into. A PON device allows computers attached to
the KH1508
Ai / KH1516Ai to be booted remotely over the net.
Contact your dealer for more details.
5 Daisy Chain
Port
When Daisy Chaining Units (see Daisy Chaining, page 18),
the daisy chain cable plugs in here.
6 Grounding
Terminal
The wire used to ground the unit connects here.
7 Local Console
Port Section
If this is a Single Station installation, or if this is the First
Station of a daisy chained installation, the keyboard, monitor,
and mouse that make up the Local Console plug in here.
8 KVM Port
Section
The Cat 5e/6 cables that link to the KVM Adapter Cables
(which link to the computers) plug in here.