User manual

4. Administration
43
Syslog Server
To record all the events that take place on the KN1000 and write them to a
Syslog server, do the following:
1. Check Enable.
2. Key in the IP address and the port number of the Syslog server. The valid
port range is 1-65535.
DDNS
DDNS allows the mapping of a dynamic IP address assigned by a DHCP server
to a hostname. To provide DDNS capability for the KN1000, do the following:
1. Check Enable.
2. Enter the hostname that you registered with your DDNS service provider.
3. Drop down the list to select the DDNS service you are registered with.
4. Key in the Username and Password that authenticates you with your
DDNS service.
5. If the KN1000’s IP address changes, it must update the DDNS server so
that the new address is properly associated with its hostname. If it fails to
update the DDNS server, it must try again at a later time. Key in the
amount of time (in hours) to wait before trying to update the DHCP server
again.