Instruction manual

27
NOTE: If you enter an incorrect serial number, the following alert message appears,
“The serial number is incorrect,, please check the serial number and try again”. This is
a preventative measure to discourage hackers from continually typing serial number
strings. Please double check your serial number and enter again.
The Administrator Tool attempts to find all the KN9000 devices installed on
the local LAN segment. Once the Administrator Tool has finished searching
for KN9000 devices, the following window appears:
• From the command prompt, type the full path to program name and then
press [Enter].
If you are running the program for the first time, the Serial Number window
appears (as shown below). Type your assigned serial number in the appropriate
fields (five characters per field) and then click OK.