Instruction manual

The KN9000 Log Server window consists of three main parts: Menu Bar,

KN9000 List panel and Event List panel. The following sections describe

each part in more detail.

You must set the MAC address of your computer as the KN9000 log server

before the KN9000 can send all computer related events to the log server.

The following steps show you how:

1. Open the Administrator Tool Utility.

2. Select the Network tab. The Network page displays.

3. Enter a valid MAC address in the Log server panel (see figure below)

and

then click OK.

The KN9000 Log Server window (see figure below) appears.

Getting Started

To access the KN9000 Log Server complete either of the following:

Double-click the Log Server icon.

From the command prompt, type full path to program and then press [Enter]