User manual

Chapter 10. AP Operation
113
The Address Input dialog box appears:
3. Key in the IP address for the unit you want to connect to - including a
forward slash followed by the login string (set by the administrator).
Note: For security purposes, the login string must be specified correctly as
part of the IP address. The system administrator may change the
string from time to time to thwart unauthorized access attempts. Be
sure you have the correct string when you attempt to connect.
After you establish a connection, a Login dialog box appears:
4. Provide a valid Username and Password, and then click OK.
Once the authentication procedure completes successfully, the KL9108 /
KL9116 main page displays on your monitor.