User manual

13
Chapter 2
Installation
Before You Begin
Standard Rack Mounting
A standard rack mounting kit is provided with your KL9108 / KL9116. The kit
enables the switch to be mounted in a rack with a depth of 42–77 cm.
Note: It takes two people to mount the switch: one to hold it in place, the other
to screw it in.
Optional mounting kits—including single person Easy Installation kits—are
available with a separate purchase. See Optional Rack Mounting, page 125, for
details.
1. Important safety information regarding the placement of this
device is provided on page iv. Please review it before proceed-
ing.
2. Ensure that all equipment to be connected is powered off.
3. Make sure that all devices you will be connecting up are
properly grounded.
4. Unplug the power cords of any computers that have the
Keyboard Power On function.
L Brackets
Side Mountng
Brackets