User manual

Chapter 4. Administration
47
6. On the RADIUS server, set the access rights for each user according to the
information in the table below:
(continues on next page)
Character Meaning
C Grants the user administrator privileges, allowing the user to configure
the system.
W Allows the user to access the system via the Windows Client program.
J Allows the user to access the system via the Java Client program.
P Allows the user to access an attached Power Over the Net™ device.
L Allows the user to access log information via a Web browser.
PN Restricts the user from accessing specified ports on the OSD port list.
Syntax: PN/1/2/3/4 (etc.)
PV Limits the user to only being able to view specified ports on the OSD
port list.
Syntax: PV/1/2/3/4 (etc.)
UHK Defines the OSD Hotkey (see page 85).
UHK0: Scroll Lock + Scroll Lock
UHK1: Ctrl + Ctrl
UOL Defines the OSD List Function (see The List Function, page 32).
UOL0: All
UOL1: Powered On
UOL2: Quick View
UOL3: Quick View + Powered On
UODM Selects how the Port ID displays (see page 85).
UODM0: Port Number + Port Name
UODM1: Port Number
UODM2: Port Name
UODT Determines the length of time in seconds that the Port ID displays on
the monitor after a port change (see ID Duration, page 85).
Syntax: UODTn (where n represents a number from 0–255)
UBUZ Turns the beeper on or off (see page 85).
UBUZ0: Beeper Off
UBUZ1: Beeper On
ULT Sets the Logout Time. When there is no input from the user for the
amount of time set with this function, the user is automatically logged
out and will need to log in again. The valid Logout Timeout range is
from 0-180 minutes.
Syntax: ULTn (where n represents a number from 0-180)