User manual

Chapter 5. Browser Operation

6. To display the Suspend Menu, Press [Ctrl+x].

Where x represents the Suspend Character set by the Administrator (see

the Property Settings dialog box under Port Configuration, p. 27). The

screen will prompt you as to the correct character. In this example, it is

[Ctrl+D] (see the prompt on the previous screenshot). The following

screen appears:

7. Press 1 to issue a Send Break command to the attached device. This is used

to put a Sun system in OK Mode.

8. Press Q to bring up the Main Menu:

sn816_Book-v2.book Page 43 Tuesday, October 24, 2006 10:37 AM