Manual

EPH-N00-06009

5-20-97

Page 11 of 11

Carefully caulk the interior jamb-to-wall

and curb-to-base joints. For appearance, you may

wish to caulk the exterior joints as well. We

recommend you wait twenty-four hours before the

first shower to allow the caulking to cure properly.

The Care and Cleaning of your new ALUMAX Bath Enclosure. The simplest

and preferred method of cleaning your unit is by washing it with clean water and

drying with a soft cloth. If soil is still present after drying, a non-abrasive cleanser

with a pH of seven to eight may be used. Comet Bathroom Cleaner

has been

tested and is recommended by the Bath Enclosure Manufacturers Association

(BEMA). Do not use scouring pads, sharp instruments, or acid-based cleansers to

clean the unit.

Thank you for choosing an A

LUMAX Bath Enclosure. Please take a moment

to complete and return the enclosed Customer Response Card. The information

you provide helps us improve the quality of our products and provide better

service to you, our customer.