K-KA3Z - Kona INSTRUCTION MANUAL KONA CURVED GLASS SLIDING SHOWER DOOR KK003
CURVED GLASS SLIDING SHOWER DOOR Please keep this manual and product code number for future reference and replacement parts ordering if necessary.
CURVED GLASS SLIDING SHOWER DOOR INSTALLATION INSTRUCTIONS FOR CURVED GLASS SLIDING SHOWER DOOR Congratulations! You have made the right choice in buying this shower system. We are convinced that you will be entirely satisfied with our product.
REQUIRED TOOLS LIST 1/4” 1/8” CERAMIC TILE DRILL BIT SCREWDRIVERS DRILL BIT 5/16 SILICON DRILL LEVEL HEX NUT DRIVER PENCIL MEASURE TAPE MALLET PACKAGING CHECK LIST & HARDWARE 5 4 8 OR 10 (FOR ‘’PARIS POINT ’’ GLASS ONLY) SET OF HANDLES (1) SIDE GASKET (2) 12 11 SIDE GASKET (2) 13 14 (M4 X 35) (M4 X 8) WALL PLUG (8) SCREW 3/8” LG (8) GLASS SUPPORT (8) SCREW CAP (8) SCREW 1 3/8” LG (14) 15 (M4 X 8) SCREW ½” LG (8) PAGE 1
PACKAGING CHECK LIST & HARDWARE TOP TRACK WITH ROUNDED CHANNEL 6 1 2 11 10 3 9 4 7 5 8 BOTTOM TRACK WITH FLAT CHANNEL 1 2 3 4 WALL JAMB (2) EXPANDER (2) SMALL FIXED PANEL (1) GASKET (1) 5 6 7 8 BOTTOM TRACK (1) TOP TRACK (1) DOOR PANEL (1) GLASS SUPPORT /L (4) 9 10 11 GLASS SUPPORT /R (4) BIG FIXED PANEL (1) SIDE GASKET (2) PAGE 2
DOOR INSTALLATION STEPS Step 1 EXPENDER (2) + TRACK (2) + SCREW 1 /3/8’’ LG (8) Step 2 INSERT WALL JAMBS TEMPORALLY PAGE 3
DOOR INSTALLATION STEPS Step 3 POSITION AND CENTER THE FRAME TOGETHER WITH WALLJAMBS ONTO THRESHOLD OF SHOWER BASE. Step 4 - ADJUST AND LEVEL THE FRAME ASSEMBLY. - TRACE OUTER EDGE OF WALL JAMBS. - REMOVE FRAME ASSEMBLY FROM BASE.
DOOR INSTALLATION STEPS 5A Step - REALIGN WALL JAMB WITH REFERENCE LINE (2). - MARK DRILLING LOCATION FOLLOWING PILOT HOLES. - DRILL HOLES BY USING SUITABLE 1/4” DRILL BIT. 5 5B ON BOTH SIDE 6A 6B Step 6C 6 - INSERT THE WALL PLUGS (6) AND PUT IN EACH A DROP OF SILICONE.
DOOR INSTALLATION STEPS Step 7 INSERT ONE SIDE OF FRAME INTO WALL JAMB Ins er Lower frame t e id Sl 8B Pu sh INTERIOR SHOWER SIDE Slide e id Sl 8A Push Pu sh Step 8 ENGAGE THE OTHER SIDE OF FRAME INTO WALL JAMB PAGE 6
DOOR INSTALLATION STEPS SMALL FIXED PANEL (1) RIGHT SMALL FIXED PANEL (1) BIG FIXED PANEL (1) LEFT OPENING OPENING Step 9 DECIDE LEFT OR RIGHT DOOR OPENING UNISTALL THE WHEELS INSTALL THE WHEELS LEFT RIGHT OPENING OPENING 1 3 2 INSTALL THE GUIDE UNINSTALL THE GUIDE PAGE 7
DOOR INSTALLATION STEPS TOP TRACK INTERIOR SHOWER SIDE Step 10 FIXED PANEL (2) ON BOTH SIDE GLASS GLASS SUPPORT BIG FIXED PANEL (1) BOTTOM TRACK INTERIOR SHOWER SIDE SMALL FIXED PANEL (1) A1 A A2 INTERIOR SHOWER SIDE B Step 11 GLASS SUPPORT (8) + SCREW ½” LG (4) PAGE 8
DOOR INSTALLATION STEPS Step 12 INSTALL DOOR PANEL (OPTIONAL) ENFONCER PUSH DOWN 12C PUSH DOWN 13A INTERIOR SHOWER SIDE 13B INTERIOR SHOWER SIDE INTERIOR SHOWER SIDE Step 13 INSERT DOOR PANELS INTO TOP & BOTTOM TRACK PAGE 9
DOOR INSTALLATION STEPS Step 14 USE HEX NUT DRIVER OR PLIERS FOR VERTICAL DOOR ADJUSTMENT TIGHTEN LOOSEN 14A 14D 14B 14C 14E VERTICAL ADJUSTMENT INTERIOR SHOWER SIDE Step 15 INSTALL SIDE PANEL GASKET ONTO FIXED PANEL 1 (1) PAGE 10
DOOR INSTALLATION STEPS Step 16 INSERT EXPANDER CAPS 7A 7B INTERIOR SHOWER SIDE Step 17 SCREW 3/8” LG (8) + SCREW CAP (8) INTERIOR SHOWER SIDE ON BOTH SIDE PAGE 11
DOOR INSTALLATION STEPS (FOR ‘’PARIS POINT ’’ GLASS ONLY) Step 18 INSERT SIDE GASKET WALL JAMB SIDE (2) (both sides) OR (FOR 6mm GLASS ONLY) INTERIOR SHOWER SIDE INTERIOR SHOWER SIDE 24 Hours Step 19 SILICONE EXTERIOR OF ( BOTTOM TRACK + ALONG WALL JAMB) PAGE 12
