Manual

ManualsBrandsAlumax ManualsFor HomeP-DR1WT-60

P011

IT IS MANDATORY TO HAVE A WALL STUD ON EACH SIDE OF THE

SHOWER UNIT TO SECURELY FASTEN THE RAIL TO THE WALLS.

2 PEOPLE REQUIRED

TUB ENCLOSURES

OWNER’S MANUAL

P-DR1WT-60

Summary of content (14 pages)

PAGE 1
P-DR1WT-60 OWNER’S MANUAL TUB ENCLOSURES 2 PEOPLE REQUIRED IT IS MANDATORY TO HAVE A WALL STUD ON EACH SIDE OF THE SHOWER UNIT TO SECURELY FASTEN THE RAIL TO THE WALLS.
PAGE 2
TABLE OF CONTENTS FIXE / FIXED PANEL 1 PANNEAU PARTS LISTING ........................................................ 3 PROVIDED HARDWARE ............................................... 4 REQUIRED TOOLS AND MATERIALS ................................. 4 GASKET INSTALLATION............................................... 5 RUNNING RAIL. ....................................................... 6 GLASS HOLDERS ...................................................... 7 GLASS CLIPS ...................................
PAGE 3
LISTING FIXED P PANEL 1 /PARTS 1 5 3 2 3 2 4 6 7 10 8 9 12 16 11 13 15 14 17 ITEM PARTS QTY 1 RUNNING RAIL 1 2 WALL BRACKET 2 3 STOPPERS 2 4 GLASS HOLDERS 2 5 TWIN ROLLERS 2 PAIRS 6 SLIDING DOOR PANEL 1 7 FIXED PANEL 1 8 HANDLE 1 9 GASKET (DOOR) 1 10 GASKET (FIXED PANEL) 1 11 BOTTOM GLASS CLIP 1 12 GASKET (GLASS CLIP) 2 13 BOTTOM GUIDE 1 14 GASKET (BOTTOM GUIDE) 1 15 THRESHOLD 1 16 DOOR PANEL SIDE GASKET 1 17 DOOR PANEL BOTTOM GASKET 1 3
PAGE 4
HARDWARE 18 19 ITEM 21 20 HARDWARE QTY 18 #12-3 SELF-THREADING SCREW 4 19 #6-1 SELF-THREADING SCREW 2 20 HEX KEY 5mm 1 21 HEX KEY 6mm (7/32˝) 1 TOOLS * HACKSAW SCREWDRIVERS DRILL 1/4˝&�1/8˝ DRILL BITS SILICONE If the shower panels are to be assembled on ceramic tiles, use a 1/4˝ drill bit for ceramic tiles.
PAGE 5
1 GASKET INSTALLATION 1A 1A 6 6 Using the cardboard packaging box as platform, install bottom door gasket (17) onto door panel (6) using a block and a mallet. Notice the gasket orientation. INTERIOR SHOWER SIDE 1B 1B Place door panel (6) inside tub to simplify following installation procedures. Ensure placing the p a n e l o n t o a c u s h io n e d s u r f a c e , s u c h a s a t o w e l o r cardboard, to prevent damage either to the panel or the tub.
PAGE 6
2 RUNNING RAIL 3 B 1 2A Position the stoppers (3) on the running rail (1) as illustrated. Secure them temporarily in place. 2 1 2B Position the wall brackets (2) on the running rail (1) as illustrated. Secure them temporarily in place.
PAGE 7
3 GLASS HOLDERS Fasten the running rail (1) to the fixed panel (7) with the glass holders (4). Secure them temporarily in place. 7 1 E n s u r e t h a t t h e r u n n in g r a il ( 1 ) is a t t h e h ig h e s t possible position in reference to the holes of the fixed panel (7). 4 4 1 WASHER GLASS HOLE 4 GLASS CLIPS Insert bottom gaskets (12) in the bottom glass clips (11) and (13). 13 11 Position glass clips (11) (13) onto the fixed panel (7) as shown. 1 1/2” (2.
PAGE 8
5 FIXED PANEL The bottom guide (13) can hang off the threshold (B) as long as it can be well-fastened. 5A P o s it io n t h e f ix e d p a n e l threshold of tub (B) as shown . a s s e m b ly (7 ) 7 on INTERIOR SHOWER SIDE 13 B Adjust the fixed panel (7), by way of the running rail (1), so as to force the gasket (10) against the wall. 1/2” max (12.7mm) 1 7 B 7 10 5B Ensure that the running rail is level and that the fixed panel is square.
PAGE 9
5 CONTINUED 5C M a r k t h e s c r e w lo c a t io n s f o r t h e w a ll b r a c k e t s (2) on the walls on both sides of shower as well as the placement of the bottom glass clips (11) (13). 2 11 6 13 THRESHOLD S 6A Remove the fixed panel assembly so as to allow placement of the threshold (15) onto the base. Ensure that a bead of silicone (S) is applied to the underside of the threshold before installing. 15 6A 15 15 6B Secure glass clips (11) (13) with self-drilling screws (19).
PAGE 10
7 WALL BRACKETS 2 7A Mark the screw locations on the walls on both sides of shower. Remove the running rail (1) f r o m t h e w a ll b r a c k e t s ( 2 ) . D r ill h o le s in w a lls until wall stud is reached with a drill bit intended for ceramic tiles. 1 2 WALL STUD Fasten the wall brackets (2) with #12-3 screws (18). 2 18 11 7 7B 13 Insert fixed panel (7) back, ensuring that it’s placed in the bottom glass clips (11) (13).
PAGE 11
8 SLIDING DOOR 8A Assemble the 2 top rollers (5) to the door panel (6) as illustrated. INTERIOR SHOWER SIDE 5 6 1 6 5 8B 7 Install sliding door (6) ensuring that rollers (5) are fixed over the running rail (1). Ensure that sliding door (6) is placed within the bottom guide (13).
PAGE 12
8 CONTINUED 5 8C Install bottom rollers, making sure that they are tangent to the running rail (1). 1 5 Through the use of the nonconcentric washers, adjust rollers so that the sliding door panel is parallel to the running rail. WASHER WASHER GLASS HOLE 9 STRAIGHT HANDLE Install straight handle (8) onto sliding door (6). Ensure that clear washers on either side of glass are installed.
PAGE 13
10 GAS KET INSTALLATION 10A Thoroughly clean the edge of the sliding door (6), closest to the side where the handle is located. Apply the door gasket (9) to this edge of the sliding door. 10A 6 9 INTERIOR SHOWER SIDE 10B Install door side gasket (16) onto slidind door panel (6). 6 10B 16 1/2” (12.
PAGE 14
11 STOPPERS Adjust the position of the stoppers (3) so as to ensure a maximum opening and closing range. Ensure that the sliding door gasket (9) is forced against the wall. DOOR CLOSED 3 3 9 DOOR OPEN 6 7 APPROX. 12 SILICONE 3” (76.2 mm) Apply silicone between the bottom of the fixed panel and the threshold of the base. Silicone application along the length of the threshold is also suggested. In both cases, it is done from the outside of the shower area.