User Guide

30-pin Bluetooth Audio Receiver

Pairing an iPhone, smartphone, tablet or computer with the receiver:

Please make sure the device supports A2DP profile. The pairing procedure will vary depending

on the actual device. Please refer to the user guide of your device for detail instruction. The

general pairing procedures are as follows:

1. Connect AIS03F to your 30-pin speaker dock.

2. Activate your device’s Bluetooth function and set

your device to search for Bluetooth devices. Select

AIS03F when it is found.

3. If prompted by your device to connect, select “Yes”.

4. After connecting successfully, the blue LED will

flash twice every 5 seconds.

Note: Press the “Pair” button if you want to pair to a different device.

Note: Please make sure the audio output is set to Bluetooth / AIS03F

for audio streaming from the device.

30-pin Speaker Dock

30-pin

Receiver

PAGE 1
30-pin Bluetooth Audio Receiver Pairing an iPhone, smartphone, tablet or computer with the receiver: Please make sure the device supports A2DP profile. The pairing procedure will vary depending on the actual device. Please refer to the user guide of your device for detail instruction. The general pairing procedures are as follows: 1. Connect AIS03F to your 30-pin speaker dock. 2. Activate your device’s Bluetooth function and set your device to search for Bluetooth devices. Select AIS03F when it is found.
PAGE 2
30-pin Bluetooth Audio Receiver Radio and TV Interference Statement WARNING!!! This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.