Installation Guide

Packing List Access Unit Installation Guide
4 BreezeCOM
2. Packing List
The Access unit is shipped with the following units and accessories. The exact
packing list varies depending on system configuration and ordered equipment.
• Indoor unit
• Outdoor unit
• 110/220 VAC Power cord (open ended)
• Sun-guard (installed on the rear side of the outdoor unit)
• Technician cable
2.1 Other Optional Items Available from BreezeCOM
• U-bolts size A kit for pole mounting (up to 2" pole)
• U-bolts size B kit for pole mounting (up to 3" pole)
• Wall mounting kit
• Sun-guard (optional for front side)
• Baseband cable (available in different lengths)
• A set of connectors for the Baseband cable (when not using the cables
available from BreezeCOM. Refer to Appendix A for instructions on how to
build the cable.)
2.2 Other Required Items
In addition to the items supplied by BreezeCOM, the following items must be
available for the installation:
• Antenna (or two antennas) for Outdoor units; refer to the Specifications on
page 20 for information regarding the radio unit.
• Power mains cable termination plug per country of installation
• U-bolts or metal bands for pole mounting (if not using the optional U-bolts
kit available from BreezeCOM)
• Ground cables with an appropriate terminal