User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 466 System Manual
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[max-dl-rtx <(0 to 15
StepSize1)> ]
The maximal number of
downlink retransmissions of
an HARQ sub-burst for this
servic
Optional 5 0 -15i
[max-ul-rtx <(0 to 15
StepSize 1)> ]
The maximal number of
uplink retransmissions of an
HARQ sub-burst for this
service
Optional 5 0 - 15
[max-subburst <(0 to
20000 StepSize 1)> ]
The maximal size of a
sub-burst in bytes for this
service.
In the current release this
parameter is not relevant.
Optional 2500 0 - 20000
[trgt-err-rate <(0.1 to 10
StepSize 0.1)>]
The target sub-burst error
rate for this service.
In the current release the
value is set by internal logic.
An attempt to change it will be
ignored.
Optional 1 0.1 to 10 in
steps of 0.1
[paging-cycle <(6 to
1000 StepSize 1)> ]
Per-Service type policy
parameter in PA used to
determine Paging Cycle value
(in frames) for the MS during
IM Entry and MS Paging.
Optional 60 6 - 1000
[paging-offset <(0 to
1000 StepSize 1)> ]
Per-Service type parameter in
PA used to determine Paging
Offset value (in frames) for
the MS during IM Entry and
Paging. Paging Offset value
shall not exceed the chosen
Paging Cycle value
Optional 0 0 - 1000
[lm-traffic-idle-period
<(50 to 60000 StepSize
50)> ]
Traffic Idle period in
milliseconds - per Service
type.
Optional 300 50 - 60000
is steps of
50