User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 470 System Manual
3.8.4.6 Displaying Configuration Information for BS Service
To display configuration information of a specific or all BS Services, run the
following command:
npu# show service bs [<(1 to 16777215 StepSize 1)> service-name <string (32)>]
Specify the BS ID and Service name if you want to display configuration
information for a particular Service. Do not specify values for these parameter if
you want to view configuration information for all existing BS Services.
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<string (32)> The Service name Mandatory N/A String
Command
Modes
bs service configuration mode
Command
Syntax
npu# show service bs [<(1 to 16777215 StepSize 1)> service-name <string (32)>]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the parameters of a
specific BS Service. Do not
specify a value for this
parameter if you want to
display the parameters of all
BS Services.
Optional N/A 1-16777215