User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 484 System Manual
3.8.5.6.1 Displaying Configuration Information for General Service Mapping
Rule Parameters
To display configuration for the general parameters of a specific or all Service
Mapping Rules, run the following command:
npu# show srvcmaprule-general bs [<(1 to 16777215 StepSize 1)> rule-index <(1
to 255 StepSize 1)>]
Specify the BS ID and Service Mapping Rule index if you want to display
configuration for a particular Service Mapping Rule. For example, to display the
General parameters of Service Mapping Rule 1 in BS 66053, run the following
command:
npu# show srvcmaprule-general bs 66053 rule-index 1
Do not specify these parameters if you want to view configuration information for
all existing Service Mapping Rules. To display information for all Service Mapping
Rules, run the following command:
npu# show srvcmaprule-general bs
Command
Syntax
npu# show srvcmaprule-general bs [<(1 to 16777215 StepSize 1)> rule-index <(1 to 255
StepSize 1)> ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the general
parameters of a specific
Service Mapping Rule. Do not
specify a value for this
parameter if you want to
display the general
parameters of all Service
Mapping Rules.
Optional N/A 1-16777215