User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 487 System Manual
3.8.5.6.3 Displaying Configuration Information for Service Mapping Rule R1
Profile Parameters
To display configuration for the R1 Profile parameters of a specific or all Service
Mapping Rules, run the following command:
npu# show srvcmaprule-r1prof bs [<(1 to 16777215 StepSize 1)> rule-index <(1
to 255 StepSize 1)>]
Specify the BS ID and Service Mapping Rule index if you want to display
configuration for a particular Service Mapping Rule. For example, to display the
R1 Profile parameters of Service Mapping Rule 1 in BS 66053, run the following
command:
npu# show srvcmaprule-r1prof bs 66053 rule-index 1
Do not specify these parameters if you want to view configuration information for
all existing Service Mapping Rules. To display information for all Service Mapping
Rules, run the following command:
npu# show srvcmaprule-r1prof bs
Command
Syntax
npu# show srvcmaprule-r1prof bs [<(1 to 16777215 StepSize 1)> rule-index <(1 to 255 StepSize
1)> ]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the R1 Profile
parameters of a specific
Service Mapping Rule. Do not
specify a value for this
parameter if you want to
display the R1 Profile
parameters of all Service
Mapping Rules.
Optional N/A 1-16777215