User's Manual

Chapter 3 - Operation and Administration Using the CLI NPU Configuration
4Motion 372 System Manual
3.3.14.1.2 Deleting an Entry for the SNMP Manager
To delete an SNMP Manager entry, run the following command:
npu(config)# no snmp-mgr index <integer>
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[ReadCommunity
<string>]
IThe SNMP Read Community
string allowing execution of
SNMP Get operations.
Optional public String (up to
10 characters
and
case-sensitive)
[ReadWriteComm
unity
<string>]
The SNMP Read/Write
Community string allowing
execution of SNMP Set and
Get operations.
Optional private String (up to 10
characters and
case-sensitive)
Command
Modes
Global configuration mode
IMPORTANT
An error may occur if you provide an incorrect index number for the SNMP Manager to be deleted. To
display the index numbers for configured SNMP Managers, refer Section 3.3.14.1.3.
Command
Syntax
npu(config)# no snmp-mgr index <integer>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<integer> Indicates the index number of
the SNMP Manager to be
deleted. Should be an index
of an existing SNMP
Manager.
Mandatory N/A 1-5