User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 520 System Manual
3.8.12 Managing Handover Negotiation at TBS
Parameters
After enabling the BS configuration mode, you can execute the following tasks:
 Configure one or more of the Handover Negotiation at TBS parameters (refer to
Section 3.8.12.1).
 Restore the default values of some or all of the Handover Negotiation at TBS
parameters (refer to Section 3.8.12.2).
You can display configuration information for the Handover Negotiation at TBS
parameters of a selected or all existing BSs (refer to Section 3.8.12.3).
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display Scan Negotiation
parameters of a specific BS.
Do not specify a value for this
parameter if you want to
display Scan Negotiation
parameters of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
EnableModifyProfile :<true/false>
Command
Modes
Global command mode