User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 521 System Manual
3.8.12.1 Configuring Handover Negotiation at TBS Parameters
From the BS configuration mode, run the following command:
npu(config-bs-66053)# honegotiation-tbs [defaultactiontime <(0 to 255 StepSize
1)>] [fastrangingalloc <(0 to 255 StepSize 1)>]
3.8.12.2 Restoring the Default Values of Handover Negotiation at
TBS Parameters
To restore some or all of the Handover Negotiation at TBS parameters to their
default values, run the following command:
npu(config-bs-66053)# no honegotiation-tbs [defaultactiontime]
[fastrangingalloc]
To configure the Handover Negotiation at TBS Parameters:
Command
Syntax
npu(config-bs-66053)# honegotiation-tbs [defaultactiontime <(0 to
255 StepSize 1)> ] [fastrangingalloc <(0 to 255 StepSize 1)> ]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
defaultactiontime <(0
to 255 StepSize 1)>
The number of frames
until allocation of
non-contention based
ranging opportunity at
target BS.
Optional 9 0 - 255
fastrangingalloc <(0 to
255 StepSize 1)>
The number of
consecutive fast ranging
opportunities the target
BS will allocate to an
incoming HO MS.
Optional 2 0 - 255
Command
Modes
bs configuration mode