User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 540 System Manual
3.8.13.6 Deleting a Neighbor BS
Run the following command from the BS configuration mode to delete a Neighbor
BS:
npu(config-bs 66053)# no nbr <(1 to 16777215 StepSize 1)>
3.8.13.7 Displaying Configuration Information for Neighbor BS
Parameters
You can display the current configuration information for the following Neighbor
BS parameters tables:
 General (refer to Section 3.8.13.7.1)
 Required C/N Level (refer to Section 3.8.13.7.2)
 Trigger Setup (refer to Section 3.8.13.7.3)
 Triggers (refer to Section 3.8.13.7.4)
 All (refer to Section 3.8.13.7.6)
Command
Syntax
npu(config-bs 66053)# no nbr <(1 to 16777215 StepSize 1)>
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to
16777215
StepSize 1)>
The Neighbour BS ID
(bs-id-lsb)
Mandatory N/A 1-16777215
Command
Modes
bs configuration mode