User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 542 System Manual
3.8.13.7.2 Displaying Configuration Information for Neighbor BS Required C/N
Level Parameters
To display configuration for the Neighbor BS Required C/N Level parameters, run
the following command:
npu# show nbr-requiredcnr bs [<(1 to 16777215 StepSize 1)> bs-id-lsb <(1 to
16777215 StepSize 1)>]
bs-id-lsb <(1 to
16777215
StepSize 1)>
The Neighbour BS ID.
Specify a value for this
parameter if you want to
display the General
parameters of a specific
Neighbour BS in a specific
BS. Do not specify a value for
this parameter if you want to
display the General
parameters of all Neighbour
BSs in all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing
Neighbour
BS in each
of the
existing BSs
if requested
for all)
BSIDLSB :<value>
NeighborBSIDLSB :<value>
SynchronizationIndicator :<value>
EIRP :<value>
SchedulingServiceSupport :<value>
Bandwidth(MHz) :<value>
UplinkFeedbackZonePermutationBase :<value>
PreambleIndex :<value>
UCDConfigurationChangeCount :<value>
DCDConfigurationChangeCount :<value>
IsotropicrecpwrforInitrang :<value>
CenterFrequency(MHz) :<value>
PagingGroupId :<value>
NeighbourStartRangeCodes :<value>
Command
Modes
Global command mode